The impact of the digital economy on urban total factor productivity: mechanisms and spatial spillover effects.

Digital economy is the indispensable pathway for driving industrial structural upgrading and fostering innovation and entrepreneurship in cities, ultimately facilitating China's economic transformation. Simultaneously, the enhancement of urban total factor productivity (TFP) serves as a crucial means to achieve high-quality economic development in cities. This study examines the specific impact of the digital economy on urban TFP using a panel data model with a sample of 285 Chinese prefecture-level cities from 2011 to 2019. Additionally, it employs a mediation effect model to test the mechanisms through which the digital economy influences urban TFP and utilizes a spatial Durbin model to analyze the spatial spillover effects of the digital economy on urban TFP. The research findings reveal the following key points: (1)The digital economy has an overall significantly positive impact on urban TFP. (2)The digital economy indirectly promotes urban TFP by encouraging the advancement of industrial structure and fostering innovation and entrepreneurship in cities. (3)The influence of the digital economy on urban TFP exhibits spatial spillover effects, where the digital economy in neighboring cities significantly enhances the TFP growth of local cities.The results of this study contribute to elucidating the mechanistic pathways through which the digital economy affects urban TFP, holding significant practical implications for achieving high-quality economic development in urban areas.

Can the development of renewable energy in China compensate for the damage caused by environmental pollution to residents' health?

China's rapid economic growth in recent decades has caused a growing problem of environmental pollution, which negatively impacts the physical and mental health of residents. In recent years, renewable energy has emerged as a promising solution to alleviate environmental pollution and improve residents' well-being. However, it is unknown whether renewable energy development can counterbalance the health impacts of environmental pollution. Therefore, we conducted a study using data from the China Family Panel Studies (CFPS) to examine the impact of environmental pollution and renewable energy on the health of 20,694 residents. Our analysis showed that renewable energy development can partially offset the negative health effects of environmental pollution. Specifically, we found that a 1% increase in environmental pollution is linked to an average decrease of 0.0911% in physical health (PHY) and 0.0566% in mental health (MEN), whereas each 1% rise in renewable energy corresponds to an average increase of 0.2585% in PHY and 0.1847% in MEN. These positive effects apply to male and female residents, urban and rural residents, young and middle-aged adults, and people with low, medium, and high levels of education. These findings are significant for decision-makers striving to improve Chinese residents' physical and mental health by considering the specific impact of renewable energy and comprehensive environmental pollution.

Preparation of modified reed carbon composite hydrogels for trapping Cu2+, Ni2+ and methylene blue in aqueous solutions.

The pollution of heavy metal ions and organic dyes seriously endangers human health and causes acute environmental problems. The adsorption method is extensively adopted in the treatment of water pollution which is more harmful to human health. In this work, the original reed carbon (ORC) was functionalized by polyethyleneimine (PEI). By means of radical polymerization, PEI-modified reed carbon (PRC), sodium alginate and lysine were made into carbon-composite acrylic hydrogel (SA/LS/PRC). Meanwhile, SEM, FTIR, TGA, and Zeta potential were used to characterize the adsorbent. The elimination capacity of SA/LS/PRC for Cu2+, Ni2+, and Methylene blue (MB) was researched through batch adsorption experiments. The adsorption behavior of SA/LS/PRC is more suitable for the pseudo-second-order kinetic model of chemical removal of pollutants and the Langmuir model relying on monolayer adsorption. The maximum adsorption capacities of SA/LS/PRC for Cu2+, Ni2+ and MB are 1245.27, 1239.47 and 627.29 mg g-1, respectively, and the adsorption performance is better than those reported in most literatures. The interaction of Cu2+, Ni2+, and MB were studied via binary mixed adsorption experience. Surface complexation and electrostatic interactions are the major removal mechanisms for contaminants. The adsorption capacity of SA/LS/PRC kept above 81% after five cycles. The SA/LS/PRC green hydrogel can be effectively applied in the mixed adsorption process of heavy metal ions and the removal of dyes.

Spatial spillover effect of green finance on economic development, environmental pollution, and clean energy production across China.

Although the extensive development model carries China's economy at the forefront of the world, it has brought great environmental pollution problems. The Chinese government hopes to control environmental pollution through green finance and achieve high-quality economic development. Based on the panel data of 30 provinces and cities in China from 2009 to 2019, this paper examines the impact of green finance (GF) on China's high-quality economic development (EQD), environmental pollution (EP), and clean energy production (CEP). In order to study the spatial impact of GF, we put spatial geographic factors into the analysis category, and use the spatial Durbin model to empirically examine the spatial effect of GF on EQD, EP, and CEP. It is found that GF can promote EQD and curb EP in China. However, GF also weakens China's CEP.

Functionalized cotton charcoal/chitosan biomass-based hydrogel for capturing Pb2+, Cu2+ and MB.

In this work, a porous multi-functional biomass carbon was prepared by acid-base modification method, which realized the reuse of waste cotton material. Then, the modified biochar was combined with the acrylic-based hydrogel by radical polymerization, and the biochar acrylic-based hydrogel (CS/EDTA/CBC) composite with chitosan and ethylenediamine tetraacetic acid was successfully prepared. This not only increases the adsorption performance of the adsorbent but also improves the stability of hydrogel. These characteristics provide high-efficiency adsorption capacity for pollutants (1105.78 mg g-1 for Pb2+, 678.04 mg g-1 for Cu2+, and 590.72 mg g-1 for methylene blue (MB)), which is far superior to most reported adsorbents. Meanwhile, the adsorbent would have a strong chemical interaction with Pb2+ and Cu2+, can form a stable chelating structure, and showed stronger selective adsorption. The adsorption process is more suitable for the Langmuir isotherm and follows a pseudo-second-order kinetic model, which indicates that the adsorption is a single-layer adsorption, and the rate-limiting step is a chemical chelation reaction. XPS results confirmed that surface complexation and electrostatic attraction are the main mechanisms of the adsorption reaction. After five cycles, the adsorption capacity of the adsorbent and the recovery of heavy metal ions remained at a high level.

Effective removal of heavy metals from water using porous lignin-based adsorbents.

Multifunctional composite materials are the key to improving removal capacity and environmental utility. Here, the adsorbent (SLCA) was obtained by free-radical polymerization of acrylic acid with sodium lignosulfonate and citric acid. FTIR, SEM, TGA and XPS characterization methods were used to prove the structure and properties of SLCA adsorbents. The maximum uptake capacities of the optimized SLCA adsorbent is 276 mg g-1 of Cu2+ and 323 mg g-1 of Pb2+, respectively. The Langmuir isotherm and the second-order kinetic model were established to illustrate that the capture of Cu2+ and Pb2+ by the adsorbent belongs to chemisorption on the monolayer. XPS analysis confirmed that complexation and electrostatic attraction are the mechanism of pollutant removal. Not only that, as-resulting adsorbent revealed no significant adsorption cycle efficiency reduction even after 5 runs of sorption-desorption cycle, manifesting that it is of great stability and could be regarded as a promising candidate adsorbent. The purpose of this research was to develop a green lignin-based adsorbent with strong environmental protection and regeneration ability based on cheap polyacrylic resin.

Synthesis of sodium lignosulfonate-guar gum composite hydrogel for the removal of Cu2+ and Co2.

As an emerging pollutant treatment material, hydrogel is known for its good adsorption capacity and environmental friendliness. In this study, a composite material of acrylic acid as the polymerization monomer grafted sodium lignosulfonate and guar gum was prepared, which provided a channel for adsorbing metal ions with its abundant active functional groups and porous structure. The optimized synthesized product was applied to the removal of Cu2+ and Co2+ in a one-component system and a multi-component system, and the maximum ion adsorption capacities obtained were determined to be 709 mg g-1 of Cu2+, 601 mg g-1 of Co2+, respectively. The adsorption kinetics and isotherms were well fitted by the pseudo second-order kinetic model and the Langmuir isotherm, showing that the adsorption of Cu2+ and Co2+ by the adsorbent belongs to the chemisorption on monolayer. XPS results confirmed the successful adsorption of Cu2+ and Co2+ by GG/SLS. Surface complexation was proposed to be the main mechanism for GG/SLS adsorbent to remove heavy metal ions. In addition, the use of recycling research showed that the adsorbent has good chemical stability. These results provided valuable information for designing highly efficient adsorbents that can be used as a high-quality wastewater treatment material.

An acute gastroenteritis outbreak associated with breakfast contaminated with norovirus by asymptotic food handler at a kindergarten in Shenzhen, China.

BACKGROUND: An outbreak of acute gastroenteritis occurred in a kindergarten located Shenzhen City on March 4, 2018. We were invited to investigate to the risk factors associated with this outbreak. METHODS: We conducted retrospective cohort-studies on three different groups of subjects in order to figure out the difference of incidence of acute gastroenteritis among subjects of different activities on March 2: group one consisted of people who attended the Lantern festival activities; group two consisted of children and employees who ate breakfast and bread provided by the kindergarten; and groups three consisted of children and employees who did not eat breakfast or bread provided by the kindergarten. Fecal, anal swabs, dishware swabs and hand swabs specimens were collected in the study. Bacteria known to cause acute gastroenteritis were cultured. Viruses associated with acute gastroenteritis were tested using real-time PCR. Capsid gene fragment of 557 bp of norovirus was amplified and sequenced. The phylogenetic tree was constructed with MEGA 7.0 using neighbor-joining method based on capsid gene fragment of norovirus. RESULTS: A total of 143 suspected cases were identified in this outbreak. Diarrhea happened more often in adults than in children while emesis and bellyache were more frequently found in children than in adults. Higher AGE incidence was observed in group 2, children and employees who had breakfast in the kindergarten on March 2, as well as in group 3, and among employees who eating bread involved in breakfast provided on March 2. Five anal swab specimens were positive for norovirus. All noroviruses belongs to group II.3 and have an identity more than 99%. CONCLUSION: A chef, as an asymptomatic carrier with norovirus, was the infectious resource in this outbreak. He contaminated breakfast food provided on March 2. Although morning check is implemented in kindergartens of China, employees are often excluded in morning check. Our finding highlights the importance of morning check covering employees and periodical training for cooks.